Samsung Printer Repair and Troubleshooting Guide

Samsung Printers are the most successful brands ever among home and office-based users across the world. Their unique advanced-features based printers help customers worldwide a quality print with ease, efficiency and unmatched value by wireless or without wireless. In our previous blog, we’d discussed Samsung wireless printer connectivity issues. Now, we have come up with providing the helpful troubleshooting steps of the Samsung Printer ML2510 in the following. So, if you are also using the same model, then you must view it.

Troubleshooting Steps of Samsung ML2510 Common Problems

When there is Paper Jamming in the ML2510 Printer:

Paper Jam in Standard Tray - 

You can gently pull out the paper first if there is a paper jam in the standard tray. You also have to check that paper is aligned correctly while pulling it out. If the paper was unable to move while pulling, then you need to check the fuser area near the toner cartridge.

Paper Jam in Manual Tray - 

For Samsung Printer Diagnostics in this tray, you need to apply the same step as mentioned above.

Toner Cartridge - 

If a paper has been jamming around the toner cartridge, then you need to open the front cover of the printer and pull the toner cartridge out. You are requested to do not expose the toner cartridge to light for more than a couple of minutes. You can cover the cartridge with a piece of paper as well. Apart from it, you are not allowed to touch the green surface under the toner cartridge. If you need it, then remove the jammed paper and replace the toner cartridge and finally close the cover.

Samsung Printer Troubleshooting of Red Light:

If the printer has been displaying the red light, then it will be considered as the serious matter, where you need to follow the steps:-

If Solid Red Light Shows in the Printer - 

• First, you need to check whether it is a paper jam or not.
• You have to make sure that the printer front cover is closed.
• Check the printer if it stopped to see that is there any error or not.
• If the toner cartridge has been not installed correctly.

If there is Red Light Blinking - 

• If there is a mirror error, then you must wait for a few minutes and the printer will resolve the problem automatically.
• If the toner cartridge is low, then you need to order a new one. If you are looking to fix it as temporary, then you have to redistribute the toner.
• However, the toner cartridge should be replaced. So, remove the old one and replace with a new one as well.

 If the Samsung ML2510 Printer Prints the Wrong Text

In Hardware:

If the printer cable is loose, then it needs to be replaced first. But, before replacing the cable, you have to disconnect it and wait for the five seconds, and then plug back the cable into the printer. You need to try by connecting the printer to a different computer and try to take the successful print. Unfortunately, if this didn’t work, then you need a new cable to get Samsung Printer repair.

In Software:

• If you have selected the wrong printer driver, then you need to take a new one.
• If the software application fails to function normally, then try to print from another application.
• Open a DOS prompt and then type the following: Dir LPT 1, if the current operating system isn’t working.
• Eventually, press the Enter and exit the windows and reboot, and then turn the printer off and back on.

If still, Samsung printer problems are continuously arising in spite of viewing the above-mentioned steps, then here you need to dial at Samsung printer support number. But, you need to have the Samsung official number, so, you need to avail it from the Contactforhelp; which is the world’s leading and trusted online directory.